Front view of the pastel HEYHAIL inflatable with two white sliding lanes, a mint-green center climb and a pink landing pool

Pastel Dual-Lane Inflatable Water Slide: Three Drain Locations

For party rental businesses comparing water slides, the front view tells you how guests move through the unit. The drain locations and pool liner tell your crew what to look for during teardown. Here’s a closer look at the HEYHAIL pastel dual-lane inflatable water slide, model HJGWS-011.

Two sliding lanes and a center climb

From the front, the mint-green climbing lane runs between two white sliding lanes. Both lanes lead into the pink landing pool. The pink, mint green and light blue color scheme is easy to see in the factory setup photo. The unit’s overall dimensions are approximately 23 ft long × 9.8 ft wide × 15.1 ft high (7 × 3 × 4.6 m).

Front view of the pastel HEYHAIL inflatable with two white sliding lanes, a mint-green center climb and a pink landing pool
Front view of the factory setup, with the two slide lanes feeding into the pink landing pool.

What the slide looks like from behind

The rear photo shows the full back wall, the mesh panels at the upper platform and the lower base. Use both views to see how the unit is laid out before planning space for it in your rental fleet.

Rear view of the pastel HEYHAIL inflatable water slide showing the upper mesh panels and rear base
Rear view showing the upper mesh panels and the base of the slide.

Where are the three drain openings?

  1. At the front of the pool, behind the zipper. Lift the pink flap on the front wall of the landing pool and open the zipper to reach this drain.
  2. Under the slide. The second drain is beneath the slide section.
  3. Under the pool. The third drain is beneath the landing pool.
Open zipper beneath the pink front pool flap with the drain opening visible inside
With the front flap lifted and the zipper open, the pool drain is visible inside.

Pool liner construction on both sides

The close-ups show a heat-welded seam on the pool-facing side and stitching on the underside of the liner. The side-by-side view gives buyers a look at the seam from both sides.

Pool liner seam close-ups showing the heat-welded pool-facing side on the left and the stitched underside on the right
Left: heat-welded seam on the pool-facing side. Right: stitching on the underside.

Request specs for your rental fleet

Contact HEYHAIL for a quote on this pastel dual-lane water slide. Include model HJGWS-011 and your delivery ZIP code so the team can confirm the configuration and quote freight.

Explore commercial water slides for sale.

Back to blog